FreeBSD/ia64 6.4-STABLE Hardware Notes
Prev  

3 Supported Devices

$FreeBSD: src/release/doc/en_US.ISO8859-1/hardware/common/dev.sgml,v 1.282.2.18 2007/12/17 12:22:05 bmah Exp $

This section describes the devices currently known to be supported by with FreeBSD on the IA-64 platform. Other configurations may also work, but simply have not been tested yet. Feedback, updates, and corrections to this list are encouraged.

Where possible, the drivers applicable to each device or class of devices is listed. If the driver in question has a manual page in the FreeBSD base distribution (most should), it is referenced here. Information on specific models of supported devices, controllers, etc. can be found in the manual pages.

Note: The device lists in this document are being generated automatically from FreeBSD manual pages. This means that some devices, which are supported by multiple drivers, may appear multiple times.

3.1 Disk Controllers

IDE/ATA controllers (ata(4) driver)

Controllers supported by the aac(4) driver include:

The ahc(4) driver supports the following SCSI host adapter chips and SCSI controller cards:

The ahd(4) driver supports the following:

Controllers supported by the amr(4) driver include:

Controllers supported by the ciss(4) driver include:

The dpt(4) driver provides support for the following RAID adapters:

Controllers supported by the iir(4) driver include:

The SRCU31 and SRCU31L can be updated via a firmware update available from Intel.

Cards supported by the isp(4) driver include:

The mfi(4) driver supports the following hardware:

Controllers supported by the mlx(4) driver include:

All major firmware revisions (2.x, 3.x, 4.x and 5.x) are supported, however it is always advisable to upgrade to the most recent firmware available for the controller. Compatible Mylex controllers not listed should work, but have not been verified.

Controllers supported by the mly(4) driver include:

Compatible Mylex controllers not listed should work, but have not been verified.

The following controllers are supported by the mpt(4) driver:

The Ultra 320 SCSI controller chips supported by the mpt(4) driver can be found onboard on many systems including:

These systems also contain Integrated Raid Mirroring and Integrated Raid Mirroring Enhanced which this driver also supports. The SAS controller chips are also present on many new AMD/Opteron based systems, like the Sun 4100. Note that this controller can drive both SAS and SATA drives or a mix of them at the same time. The Integrated Raid Mirroring available for these controllers is poorly supported at best. The Fibre Channel controller chipset are supported by a broad variety of speeds and systems. The Apple Fibre Channel HBA is in fact the FC949ES card. This driver also supports target mode for Fibre Channel cards. This support may be enabled by setting the desired role of the core via the LSI Logic firmware utility that establishes what roles the card can take on - no separate compilation is required.

The sym(4) driver provides support for the following Symbios/LSI Logic PCI SCSI controllers:

The SCSI controllers supported by sym(4) can be either embedded on a motherboard, or on one of the following add-on boards:

With all supported SCSI controllers, full support is provided for SCSI-I, SCSI-II, and SCSI-III peripherals, including hard disks, optical disks, tape drives (including DAT, 8mm Exabyte, Mammoth, and DLT), medium changers, processor target devices and CD-ROM drives. WORM devices that support CD-ROM commands are supported for read-only access by the CD-ROM drivers (such as cd(4)). WORM/CD-R/CD-RW writing support is provided by cdrecord(1), which is a part of the sysutils/cdrtools port in the Ports Collection.

The following CD-ROM type systems are supported at this time:



3.2 Ethernet Interfaces

Adapters supported by the aue(4) driver include:

The bge(4) driver provides support for various NICs based on the Broadcom BCM570x family of Gigabit Ethernet controller chips, including the following:

The cue(4) driver supports CATC USB-EL1210A based USB Ethernet adapters including:

The dc(4) driver provides support for the following chipsets:

The following NICs are known to work with the dc(4) driver at this time:

Adapters supported by the de(4) driver include:

The em(4) driver supports Gigabit Ethernet adapters based on the Intel 82540, 82541ER, 82541PI, 82542, 82543, 82544, 82545, 82546, 82546EB, 82546GB, 82547, 82571, 82572 and 82573 controller chips:

Adapters supported by the fxp(4) driver include:

The hme(4) driver supports the on-board Ethernet interfaces of many Sun UltraSPARC workstation and server models. Cards supported by the hme(4) driver include:

The kue(4) driver supports Kawasaki LSI KL5KLUSB101B based USB Ethernet adapters including:

The pcn(4) driver supports adapters and embedded controllers based on the AMD PCnet/FAST, PCnet/FAST+, PCnet/FAST III, PCnet/PRO and PCnet/Home Fast Ethernet chips:

The re(4) driver supports RealTek RTL8139C+, RTL8169, RTL816xS, RTL811xS, and RTL8101E based Fast Ethernet and Gigabit Ethernet adapters including:

Adapters supported by the rl(4) driver include:

Adapters supported by the sf(4) driver include:

The sis(4) driver supports Silicon Integrated Systems SiS 900 and SiS 7016 based Fast Ethernet adapters and embedded controllers, as well as Fast Ethernet adapters based on the National Semiconductor DP83815 (MacPhyter) and DP83816 chips. Supported adapters include:

The txp(4) driver supports the following cards:

The vx(4) driver supports the following cards:

The xl(4) driver supports the following hardware:

Both the 3C656 family of CardBus cards and the 3C556 family of MiniPCI cards have a built-in proprietary modem. Neither the xl(4) driver nor any other driver supports this modem.

3.3 Token Ring Interfaces

3.4 FDDI Interfaces

3.5 ATM Interfaces

3.6 Wireless Network Interfaces

[i386, amd64] Intel PRO/Wireless 2100 MiniPCI network adapter (ipw(4) driver)

[i386, amd64] Intel PRO/Wireless 2200BG/2915ABG MiniPCI and 2225BG PCI network adapters (iwi(4) driver)

3.7 Miscellaneous Networks

3.8 ISDN Interfaces

3.9 Serial Interfaces

The uart(4) driver supports the following classes of UARTs:

PCI-Based multi-port serial boards (puc(4) driver)



3.10 Sound Devices

3.11 Camera and Video Capture Devices

3.12 USB Devices

A range of USB peripherals are supported; devices known to work are listed in this section. Owing to the generic nature of most USB devices, with some exceptions any device of a given class will be supported, even if not explicitly listed here.

Note: USB Ethernet adapters can be found in the section listing Ethernet interfaces.

Note: USB Bluetooth adapters can be found in Bluetooth section.

The ohci(4) driver supports all OHCI v1.0 compliant controllers including:

The uhci(4) driver supports all UHCI v1.1 compliant controllers including:

USB 2.0 controllers using the EHCI interface ( ehci(4) driver)

Hubs

Keyboards ( ukbd(4) driver)

Mice (ums(4) driver)

The umct(4) driver supports the following adapters:

3.13 IEEE 1394 (Firewire) Devices

The fwohci(4) driver provides support for PCI/CardBus FireWire interface cards. The driver supports the following IEEE 1394 OHCI chipsets:

3.14 Bluetooth Devices

3.15 Cryptographic Accelerators

3.16 Miscellaneous

Keyboards including:



Pointing devices including:

Note: moused(8) has more information on using pointing devices with FreeBSD. Information on using pointing devices with Xorg can be found at http://www.x.org/.



Prev Home  
Supported Processors and Motherboards    

This file, and other release-related documents, can be downloaded from http://www.FreeBSD.org/snapshots/.

For questions about FreeBSD, read the documentation before contacting <[email protected]>.

All users of FreeBSD 6-STABLE should subscribe to the <[email protected]> mailing list.

For questions about this documentation, e-mail <[email protected]>.